There
is a huge range of elastomer products that are put to use in different
industries. Like for example, in the automobile industry, elastomer
products like ball joints and anti-vibration mounts are used. Annular
blowout preventer packing unit, annular blowout seal kits, ram blowout
spare parts, pipe wipers, wiper cutter assembly, drill pipe protector,
tong and elevator straps and aero union tubes are some of the Elastomer products used in the oil drilling industry.
To
begin with, pipe wiper is not a pipe or has nothing to do with a pipe.
It is in fact a device shaped like disk, which is generally made of
rubber and has a hole in the center. The function of a pipe wiper is
quite easy to understand. A pipe wiper is used for getting rid of oil or
any other liquid, when the fluid is being extracted from the wellbore. A
pipe wiper is generally used during the regular maintenance repair
process.
Different
types of rubber are used to make pipe wipers. Drill pipe wiper has to
be made of specially designed rubber, as it has to have the capacity to
sustain the tremendous pressure, abrasion and tearing. The kind of
rubber to be used depends on the purpose of the pipe wiper. At
Integrated Equipment, we use proprietary engineered rubber compound to
make pipe wipers. The material we use for making the pipe wipers is
resistant to both oil-based drilling and water. The wear and tear
properties of this compound, makes it resistant to tearing, abrasion and
cutting.
The
three types of pipe wipers that are manufactured by Integrated
Equipment are regular dual wipers, type F wipers and split dual wipers.
The regular dual wipers are quite easy to install. They provide flexible
and double wiping action on drill strings where oversize tool joint and
pipe protectors are used. We make use of steel reinforcing rings to
prevent collapse.
Split
dual wipers manufactured by us are used on the drills which have a
solid master bushing. Our split dual wipers are installed in tear-proof
sloths which can easily cut through the outer edge of the wiper, so that
it becomes easy to install. The type F wipers are designed for
drilling and workover rigs which do not have much room below the master
bushing.
All
types of pipe wipers manufactured by Integrated Equipment are resistant
to water and oil-based mud, so you don’t have to worry about replacing
the Pipe wipers
for a long time. Integrated Equipment not only manufactures oil
drilling equipment, it also provides quality after-service including
emergency servicing. Under field services we also do onsite inspections
and re-certifications. Every kind of technical need that can be needed
in case of any of Integrated Equipment’s products will be provided at
any hour.