• Sign up
  • ‎What is Shvoong?‎
  • Sign In
    Sign In
    Remember my username Forgot your password?

Summaries and Short Reviews

.

Shvoong Home>Science>Electromagnetic characteristics of cold crucible in an induction coil for melting purpose Summary

.

Electromagnetic characteristics of cold crucible in an induction coil for melting purpose

Article Abstract by: TsingHua    

Original Author: Journal of Harbin Institute of Technology
The electromagnetic characteristics of cold wall crucible, especially its field strength and distribution, were evaluated
experimentally, in which the effects of parameters as input power and position were also discussed. The results showed that the magnetic induction intensity (B) increased with the increase of the input power. Along the radial direction inside the cold crucible, B is the strongest at the edges, and gradually attenuated from the edges to the center. While along the axial direction, B is the strongest at the center, and gradually attenuated from the center to the edges. Corresponding with the calculation on electromagnetic field distribution inside the coil without cold crucible, the effects of cold crucible on the Electromagnetic field have been reduced by comparing measured and calculated results. However, it was also found that the value of B strength will be decreased to about 50% of its original proposition without cold crucible due to the electromagnetic shielding effect, which will be the understanding for melting turns in cold crucible.
Published: April 30, 2006
Please Rate this Review : 1 2 3 4 5

Bookmark & share this post

.