It's actually a headache issue for car drivers when car headlights are fogged or scratched in this or that cases. Because of the vital role car headlights playing in cars, multiple drives are declined to spend much unnecessary money on purchasing a new replacement. However, if there is a convenient and simple way to restore your car and keep much of your money in your pocket, will you stop eyes to look through it? The answer must be “Yes!”
NearbyExpress who is the professional dropship supplier of wholesale car headlight kits promotes the following steps to help you restore your car headlights at home by yourself!
First of all
, purchase a headlight restoration kit which is available in NearbyExpress now and Verify that all parts to your headlight restoration kit are included in the box. There should be two pouches of thick liquid for polishing; four pouches of clear coat sealant, two pieces of brown sandpaper, two pieces of blue sandpaper, four hydro-weave cloths, and a glove. There should also be a set of written instructions.
perform the initial sanding after washing your headlights with soap and water. First spray a mist of water onto the headlight. This acts as a lubricant for the sandpaper. Then, take one of the sheets of brown sandpaper and use it to thoroughly sand the surface of the lens. This removes most of the residue that is fogging the headlight. Finally, wipe the lens with a paper towel to remove any lose residue from sanding. Repeat these steps.
polish the headlight by Opening one of the pouches and pouring a generous amount of this thick liquid onto one of the hydro-weave cloths. Firmly rub the cloth over the surface of the lens to polish the entire headlight. If the polishing solution begins to dry before you finish, either add more liquid to your cloth or spray water onto the headlight lens to reactivate the solution.
clean the headlight before Apply the clear coat sealant to the headlight by using a damp cloth to clean the entire surface and Scrub the surface as hard as possible. Then Open one of the pouches of and pour clear coat sealant onto one of the hydro-weave cloths. The solution can pour out quickly, so go slowly to allow the liquid to soak into the cloth. When all the solution is soaked in, make long, smooth swipes across the headlight, from one side to the other, until you have coated the entire surface. Wait 2 minutes for this initial coat to dry. One thing should be attention: Clean up any excess clear coat. Most headlight restoration products are paint-safe, but the clear coat that was applied in Steps 8 and 9 will harden over the top of paint or chrome if it is left alone. If you accidentally get the clear coat onto other areas of the car, simply wash it with a damp cloth before it dries.
All in all
, car headlights are the key to protect drivers’ safety, do not ignore its importance; nevertheless you will hurt yourself and others at the same time. Money-saving is possible but not for labor-saving if you choose to restore your car headlights at home, therefore if your headlights get yellow or damaged heavily, you’d better to buy a new one, NearbyExpress
(http://www.nearbyexpress.com/catalog-products-1/car-electronics/led-lights.html) is a nice option you can take into account.